 This cute little knife is Columbia River's Ashworth Turtle. The steel is 420J2 that has been polished, and the scales are a CPL composite (think bowling balls). The Turtle is only 3 inches long overall, and it comes with a money clip that replaces the rear scale and a neck chain holder (chain not included). |
More info ›› |
|
|
 This cute little knife is Columbia River's Ashworth Turtle. The steel is 420J2 and the scales are a CPL composite (think bowling balls). The frame is black titanium nitride coated. Overall length is a whopping 3" with a 1" blade. Comes with a pocket / money clip and a neck chain holder (chain not included). Note: The rear scale is removable and can be replaced with the money clip. |
More info ›› |
|
|
 Columbia River's Ashworth Turtles feature a 420J2 steel blade and scales made from a CPL composite material (think bowling balls). The frame is black TiNi coated and the blade is polished. Overall length is 3" with a 1" blade. Comes with a removable money clip and a chain holder (chain not included).
Note: This knife features CPL scales on both sides with the rear scale removable so that the money clip can be attached. |
More info ›› |
|
|
 This Columbia River Bear Claw comes with a blunt tip blade. This makes it safe when cutting seatbelts and the like. |
More info ›› |
|
|
 This CRKT knife designed by Russ Kommer features an AUS 4 steel blade, a black Zytel handle, and a multi-position Zytel sheath. |
More info ›› |
|
|
 This Russ Kommer designed knife features AUS 4 steel, a Zytel handle, and a multi-position Zytel sheath. |
More info ›› |
|
|
 Fishing Anyone?
The top part of the blade is hollow ground to help "lift" the fillet, while the bottom part is flat ground in order to easily slide along the skin of the fish. |
More info ›› |
|
|
 This CRKT knife was designed by Kit Carson and features his Carson Flipper. This flipper allows you to flip the blade open with your finger and doubles as a finger guard. The handles are hard anodized aluminum and the plain-edged blade is made from AUS 8 steel. |
More info ›› |
|
|
 This Kit Carson designed folder features his Carson Flipper which acts as a blade guard when the knife is open. The handle is hard anodized aluminum and the knife blade is AUS 8 stainless steel. It also features the AutoLAWKS safety lock that secures the liner lock in its proper position. |
More info ›› |
|
|
 This Kit Carson designed folder features his Carson Flipper which allows you to flip the blade open and also acts as a blade guard. This M21 comes with a hard anodized aluminum handle and a AUS 8 stainless steel blade. It also features the AutoLAWKS safety lock. |
More info ›› |
|
|
 This Kit Carson designed folder features Columbia Rivers' OutBurst Assisted Opening Mechanism which springs the blade open once the blade has been opened 30 degrees. It also features the AutoLAWKS locking system which prevents the locking liner from disengaging from behind the blade. |
More info ›› |
|
|
 This Natural 2 comes with Jig Bone scales and a 3.25" 8Cr13MoV steel blade. It features Columbia River's Outburst assisted opening mechanism and comes with a clip for easy pocket carry. |
More info ›› |
|
|
 This knife contains a built in 400 grit diamond-coated sharpener that sharpens the edge everytime you open or close the blade. |
More info ›› |
|
|
 This Montu features a bead blasted blade of AUS 8 stainless steel that is 3.25 inches long. The handle is made of Zytel and a CPL composite material like that used in bowling balls. Comes with a pocket clip. This knife also features the LAWKs safety and the OutBurst Assist mechanism. |
More info ›› |
|
|
|
This CRKT Montu features a partially-serrated & bead-blasted blade made from AUS 8 stainless steel. The handle is made of Zytel and a CPL composite material like that used in bowling balls. Comes with a pocket clip. Blade length is 3.25". This knife also features the LAWKs safety lock that keeps the liner behind the blade, and the removable OutBurst mechanism that helps with opening of the blade. |
More info ›› |
|
|
 Brand new for 2009, this Alan Folts Minimalist neck knife comes with a 2" 5Cr15MoV steel blade and Micarta handle scales. The neck sheath is made from Zytel. |
More info ›› |
|
|
 Here is the Blade Magazine 2007 Best Buy Of The Year winner: The CRKT Guppie multi-tool. It comes with an open end wrench, 2.0" 3Cr13 knife blade, a removable bit carrier that holds 4 different screwdriver bits and an LED light, a non-weight bearing carabiner, and a bottle opener. Also comes with a pocket clip that doubles as a money clip. |
More info ›› |
|
|
 Designed by Ed Halligan, HUG is short for Halligan's Ultimate Gadget. The 420J2 blade is 2.3" and is given a black titanium-nitride coating. The high-carbon steel frame is also given this coating. The pocket clip is given a black Teflon plating. The handle is Zytel on one side and steel on the other side. |
More info ›› |
|
|
 Designed by Ed Halligan, HUG is short for Halligan's Ultimate Gadget. The 420J2 blade is 2.3" and is given a black titanium-nitride coating. The high-carbon steel frame is also given this coating. The pocket clip is given a black Teflon plating. The handle is Zytel on one side and steel on the other side. |
More info ›› |
|
|
 The Columbia River Ripple 2 is the little brother of the Ripple and features a 2.70" Acuto+ steel blade. The CNC machined steel handle has a charcoal colored titanium nitride finish that has been given a pocket-worn burnish. The blade is easily opened via the blade flipper, and a pocket clip makes it easy to carry.
The locking mechanism used is a frame lock. |
More info ›› |
|
|
